background image

82

14. Warranty declaration

Theben HTS presence detectors are manufactured and tested for quality with greatest of care 

and most modern technology. Theben HTS AG thus guarantees smooth function with correct use. 

Should a malfunction appear, Theben HTS AG guarantees within the scope of the General Terms 

and Conditions:

Please notice specifically:

 

that the warranty is valid for 24 months from date of manufacture. 

 

that the warranty becomes void if you or a third party makes modifications or repairs to the 

devices.

 

that, as long as the presence detector is connected to a software controlled system, the war-

ranty for this connection is only valid if the interface specifications are adhered to.

We are obligated to improve or replace as quickly as possible all damaged or unusable parts within 

the scope of delivery, proven insufficient materials, faulty construction or lacking models up to the 

end of the guarantee period. 
Dispatching
For cases covered by the guarantee, send the device, together with the shipping order and a short 

description of the problem to the responsible specialised dealer.
Industrial property rights
Concept, as well as hard and software of this device are copyrighted.

Содержание PlanoCentro 000-A-230V





























Отзывы: