70
5.3 Behaviour on switching on
Every time the voltage is switched on, the detector goes through the start-up phase, which is
indicated by the LED. The presence detector runs through several tests during the start-up phase.
If the tests run without any problems, then the presence detector switched to normal operation
mode. If there is a problem (LED blinks rapidly), the light is switched on and does not switch off.
1. Start-up phase (30 seconds)
●
LED blinks in second intervals.
●
Parallel output is active
●
Parameter adjustment is possible (active after start up phase has run)
●
Test mode can be activated.
2. Operation mode normal
●
The detector is ready for operation (LED off)
3. Event of malfunction
●
LED flashes rapidly
●
The light is switched on and does not switch off as long as there is a malfunction
●
Troubleshooting see page 77
