6
Set external input (only with LUNA 121 top3 RC)
For the channel, an EXTERNAL INPUT (see fi gure) can be set
with different functions.
3 sub-menus can be selected: Inactive, push button (function),
switch (function)
•
NOT ACTIVE: The external input has no function
•
BUTTON: Manual (manual control), Timer (countdown
timer) are selectable
•
SWITCH: PERM ON, PERM OFF and LUX ONLY are
selectable
L
If a function is activated via an external push button or
switch, EXTERNAL is displayed.
OPTIONS
MENU
SENSORS
OPERATING
HOUR
EXT INPUT
LCD
ILLUMINATION
CHANNEL C1
BUTTON
STAIRCASE
LIGHT
RESETABLE
MINUTES
SWITCH
OVERRIDE
EARLY CUT
NOT ACTIVE
TIMER
u
u
u
u
u
u
...
*
*
Use switch without glow lamp (e.g.
in stairwells)
¾
Press MENU, with
u
select EXT INPUT and follow the indi-
cations on the display.
L
Additional power unit required for GPS if only one device
is connected to the antenna.
L
Refer to the operating instructions when connecting a GPS
antenna (9070610).
Minimum number of participants needed to operate the GPS
antenna:
•
2 x weekly timer TR 611 top3 RC, SELEKTA 171 top3 RC
LUNA 121–122 top3 RC each with 50 mA feed, or
•
1 x weekly timer with 50 mA feed plus 1 x top2 GPS
power unit (9070892) with 50 mA feed
Setting channel lock (only with LUNA 122 top3 RC)
There are situations where two channels must not be swit-
ched at the same time!
The channels can be interlocked in this case.
L
The channel lock prevents both channels from switching
on at the same time.
If a channel is already switched on, the second channel will
not switch on until the fi rst channel is switched off and a
waiting time of 1 s has passed.
If both channels are switched on at the same time, channel 1
has priority.
OPTIONS
OPERATING
HOURS
METER
EXT INPUT
CHANNEL
COMBINATION
LCD
ILLUMINATION
CHANNEL
LOCK
LANGUAGE
NOT ACTIVE
PIN
PROGRAM
CHANGEOVER
FACTORY
SETTINGS
INFO
MENU
u
Channel combination
The channel combination reduces maintenance for wear to
the lamps and also allows energy to be saved.
1
2
1
2
1
Astronomical switch-on at sunset
1
2
1
2
1
At a defi ned time, switch off the second channel to save
energy and retain basic lighting.
1
2
1
2
1
Each week/day, change the channel that is switched off to
use the consumers evenly.
Program changeover (LUNA 122 top3 RC only)
The program changeover function is mainly used for street
lighting. Every second lamp is often switched off at night bet-
ween 23:00 and 05:00. The lamps will therefore not wear out
at the same time. If program changeover is used to switch the
program from channel 1 (C1) to channel 2 (C2) every other
week however, the lamps will be used evenly. Program chan-
geover can be set to every other day or every other week.
•
Every day: time for changeover required
•
Weekly: day of the week (Monday – Sunday) and time
for changeover required
