Manual DALI button interface TA 4 S DALI-2
6
3
Technical data
Operating voltage
DALI (in accordance with IEC 62386-101): 10 V – 22.5 V
Power input
max. 10 mA
Type of installation
1
Flush-mounted box according to DIN 49073
Type of contact
NO contact or opening contact, potential-free
Contact voltage
5 V
Contact current
0.5 mA (5 mA peak)
Output voltage
5 V DC
Debounce time
50 ms
Resistance range for slider or
potentiometer
0 … 100
kΩ
Max. temperature measurement
range
2
- 25 °C … + 75 °C or 0 °C … + 85 °C
Protection rating
IP 20 (IP 40 when installed)
Protection class
II (subject to designated use)
Ambient temperature
-15 °C … + 50 °C
Pollution degree
2
Rated impulse voltage
4 kV
Connection type DALI
Screw terminals
Cable cross-section
0.14 – 1.5 mm² one wire
0.14 – 1.5 mm² fine wire
0.25 – 0.5 mm² fine wire with crimp terminal (with and
without plastic sleeve)
Length of connecting wires for
buttons or temperature sensor
25 cm
Max. cable length for buttons or
temperature sensor
30 m
CE Declaration of Conformity
This device corresponds to EN 60669-1/-2-1/-2-5
RCM conformity
This device is compliant with the ACMA guidelines.
DALI conformity
IEC 62386-101/103/301/302
1
can be installed with conventional buttons/switches in flush-mounted boxes
2
Measurement range depends on the temperature sensor used. Further information can be
found in chapter 8.2 Memory bank 3 – absolute input device.
