Manual DALI button interface TA 4 S DALI-2
11
7
Settings
All settings are configured via the DALI bus.
In its initial delivery condition, the TA 4 S DALI-2 button interface does not yet have a
short address.
7.1
Settings via the DALI bus
All parameters and configuration commands are set by the application controller via the DALI
bus. The TA 4 S DALI-2 button interface supports the parameters and configuration commands
according to IEC 62386
*
Part 103/301/302.
Parameters which are not defined by the standard are stored in the memory bank.
The default values of the parameters in the factory settings are also according to standard
IEC 62386
*
Part 103/301/302.
*
incl. DiiA Guidelines „Clarifications & Recommendations for IEC 62386“, version 1.2, April 2020
