2
Example:
400 Lux is required in the working area. The blinds are
adjusted with the lights switched off so that the light meter shows around
200 Lux. The lighting is then gradually brightened, until the light meter
shows around 400 Lux.
Using the “Brightness” menu on the Quick-
Set plus remote control, the values can
be sent to the detector in an increasing or
decreasing sequence.
If the value sent is too small, the LED will blink briefly (error blinking), if
the value is too large, the LED will flicker for one second.
A value which makes the detector flicker
straight away rather than show the error
blinking, (e.g. 4.3) must be entered in
the settings window on the ETS as the
brightness value. This value is now the
detector’s new desired value.
The desired value found in this way should take into account reflection and
influences such as furniture, installation location, incidence of light, etc.
●
●
●
●
3.9
4.0
4.1
