1
2. Operation:
The detector is ready for use
Switching:
if there is presence and insufficient daylight, the detector
switches on the lighting.
Constant light control:
if there is presence, the detector sets the
lighting to the desired brightness.
If there is no presence or sufficient brightness, the detector switches the
lighting off.
5. Setting the Brightness Value
Using the QuickSet plus service remote control (software V3.02 or newer),
the desired brightness can be easily set.
Set the brightness by adjusting the artificial
light and blinds until the brightness in the
working area corresponds to the desired
value.
Example:
400 Lux is required in the wor-
king area. The blinds are adjusted so that
the light meter shows around 400 Lux.
In case of dimmable lighting, the brightness should be made up of half
artificial light and half daylight where possible.
●
●
●
●
●
●
GB
200 Lux
