The Wine Square CUBE LT, Руководство пользователя, Страница: 16 / 60

14
Install an RJ45 network wire with minimum 23AWG wires between the RC4LT and the
control box location. Allow a minimum of 36” of wire to hang in the wine cellar and the
length needed to connect to the right side of the control box.
D
NOTE : It is more prudent at this stage to run a second RJ45 wire away from the
first. In the event that the first is damaged by a nail or screw when closing the
walls, the second can be used.
Install an RJ45 network socket connected to the internet near the device. The CUBE
LT
uses a wired connection to connect to the internet.
E
Have a professional install a NEMA 5-15R, 2-pole electrical outlet on a dedicated circuit
for powering the control box and the water cooler.
F
Install a nailing backing on the wall at the location of the control box. The nailing bottom
must be at least 36” high and 10” wide. The top of the bottom nailing panel must be
installed 60” above the ground.
G
NOTE : Before closing the walls, take the time to review the “Check List” in the
appendix to make sure that nothing has been forgotten.