Place the two
Front Pipe
Sections
into position on
top of the
Base
and clip
into place with the other
Double Pipe Clip
.
37
Position the
Back Pipe
Section
so that the short
end is inserted into the
matching hole in the
Front
Support Stand
and the
long end aligns with the
correct one of the
Middle
Pipe Sections
so that the
pipe appears to run in a
straight line and clip into
place with the
Single Pipe
Clip
.
38
Turn the
Assembly
over.
39
Double Pipe Clip
BOX 3
Front Pipe Sections
BOX 3
Single Pipe Clip
BOX 3
Back Pipe Section
BOX 3
Store the
Vault-Tec Tools
in the underside of the
base, ready for future use.
To avoid the
Screwdriver
becoming falling out of the
Base
, rotate it so that the
Vault-Tec logo or the word
Vault-Tec is showing, thus
allowing the handle clips
to grip the screwdriver
securely.
41
1:1 COMPONENT
GUIDE
Screw the
Small Thread-
forming Screw
through
the underside of the
Base
to secure the
Large Single
Pipe Clip
.
40
Small Thread-forming Screw
BOX 3
Reversible Blade Screwdriver
8 mm Spanner
