IMPORTANT
: When screwing the top and bottom parts of the
Base
together, two different types of screw are used. There
are two
M5 Machine Screws
and two
12 mm Thread-forming Screws
. They appear to be very similar, but look carefully at
the screws and note the difference. The
M5 Machine Screws
have a smaller pitched thread and the screw shank is slightly
thicker; please note that these are for use at
Support Stand
end of the
Base
. The
12 mm Thread-forming Screws
have a
more angled thread and a more open pitch; these screws are for use at the
Speaker
end of the
Base
.
1:1 COMPONENT GUIDE
Once the two subassemblies are
fitted together,
being careful not
to flex
the assembly, turn it
over.
31
Screw the two
12 mm Thread Forming
Screws
into the front two holes at what
will be the
Speaker
end of the
Base
.
28
Carefully push the
Speaker Tube Stand
Support Assembly
into
place in the top of the
Base
, making sure that
the main electronics
Connector Plug Pins
engage in the
Base
Plug Socket
.
30
12 mm Thread-forming Screw
BOX 3
Base Plug Socket
Turn
Base Assembly
over.
29
1:1 COMPONENT GUIDE
Rotate
Back Stand Support Cover
into
position so that it fits squarely onto the
back of the
Front Stand Support
, ensuring
that the
Speaker Cable
lays neatly down the
center of the gap between the front of the
RobCo
Electronics Cover
and the back of
the
Front Stand Support
.
24
Screw the two
30 mm Screws
into the top of
the
Back Stand Support Cover
to fix the
cover firmly to the
Main Housing
.
25
Assemble the
Base Cover
Housing
on to the
Base
.
26
Turn
Base Assembly
over.
27
30 mm Thread-Forming Screw
BOX 3
Base Cover Housing
BOX 1
Base
BOX 1
