ACHAT DSP24 • OWNER’S MANUAL
2
Introduction
Thank you very much for expressing your confidence in our
products by purchasing the ACHAT DSP24, our high-quality
Digital Speaker Processor, designed specifically for both live
and studio applications. Please read the manual carefully and
keep it for future reference.
Important Safety Instructions
For your own safety you must read this section in full first!
Intended use
This manual explains the intended use of the device. Using it
in any other way invalidates the warranty and you risk a life-
threatening electric shock.
Warning:
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions in
the accompanying literature. So read the manual.
Risk of electrical shock!
• Connect the device only to a properly wired and earthed
electrical wall socket providing a mains voltage of 230 V~/
50 Hz.
• NEVER operate the device if the device itself, the power
plug, or the power cord is damaged.
• NEVER submerse the device in water or any other fluid.
Wipe it only with a slightly damp cloth.
• NEVER expose the device to rain or moisture and never use
it in a damp or wet environment. This device was developed
for indoor use only. Do not use it outdoors.
• Ensure that the power cord does not become wet during
operation.
• You must NEVER open the housing of the device or try
to repair it. There are no user serviceable parts inside.
Warranty will become void if you open the housing and you
face the
risk of electric shock
.
• Do not place objects containing fluids, e.g. flower vases or
beer bottles, on or near the device.
• Notice regarding power disconnection:
To disconnect the device from the power source the power
plug must be removed from the power socket. For this
reason the device must be placed in a position where
a constant unobstructed access to the power socket is
assured, thus in an emergency situation you are able to
immediately pull out the power plug. To eliminate the risk
of fire you must completely disconnect the power plug from
the power socket when the device is not in use.
• Always grasp the power cord by the plug. Do not pull on the
cord itself and never touch the power cord with wet hands
as this could result in a short circuit or an electrical shock.
Do not place the device, speaker cabinets or anything else
on the power cord and make sure that it does not become
clamped. Place the power cord in a position where it can
not be trod on. A damaged power cord can cause a fire
or an electrical shock. Check the power cord from time to
time. Should it become damaged contact our customer
service centre to have it replaced.
• Never manipulate the power cord or the plug. If a power
cord is provided with an earth lead, this is mandatory to
ensure safe operation!
Risk of fire!
• NEVER leave the device unattended while it is switched on.
• Never cover any ventilation slots of the device while it is
switched on. Avoid placing this device in locations that
provide insufficient ventilation or hot locations and do not
