The Splash Lab TSL.420, Установка и обслуживание

Страница: 8 / 20

Access Requirements
Soap reservoir must be accessible for installation, commissioning and for ongoing/
routine maintenance.
Front access: If the underside of the wash basin is tiled in, or is fixed onto a vanity
unit, a front hatch or panel(s) must be constructed below the wash basin for ongoing
maintenance access.
Installation Requirements
1. The soap dispenser is intended to be mounted in a countertop or basin
adjacent to a tap. As a guide, The Splash Lab recommends a minimum
distance of 100mm between the dispenser and a tap.
2. The TSL.420 is supplied with a single-feed reservoir to be connected with
Maximum countertop thickness 35mm
Access requirements Power supply units and pump units must be
accessible for initial installation & commissioning
and for ongoing/routine maintenance.
Washroom layout Soap pump and reservoir must be accessible
for installation, comissioning and ongoing
maintenance.
Power supply 3am fused spur to be connected to IP68
transformer supplied. It is not recommended that
sensor-operated soap dispensers are connected
to an occupancy circuit.
before you install
TSL.420 MANUAL 8
!
Caution
+ The TSL.420 parts must be put together correctly before installation.
+ All parts must be installed correctly before powering up the system.
a flexible feed-pipe to the dispenser. If a multifeed system is required, this
needs to be specified separately.