The Splash Lab TSL.420, Установка и обслуживание

Страница: 13 / 20

13 TSL.420 MANUAL
commissioning
operation
Adjusting the soap dispensing volume:
1. Switch on the power supply at the fused spur or socket.
2. Turn on the pump by turning the dispense dial clockwise.
3. Depress and hold the ‘Prime’ button until soap is dispensed.
4. Activate the dispenser by placing your hand underneath the sensor to check
the volume of the soap that is dispensed from the nozzle.
5. The volume of soap dispenses can be adjusted by turning the ‘Dispense’ dial
clockwise to increase the soap volume, or anticlockwise to reduce the soap
volume.
+ The user places their hands within detection range of the sensor to activate the soap
dispenser.
+ The motor will start and soap is dispensed onto the user’s hands.
+ The motor will stop when the user’s hands are removed from the detection range.
IMPORTANT
The dispenser is only to be used with a compatible foam soap, with a viscosity of less
than 10cPs. It is not suitable for use with liquid or pearl soap, alcohol gels or hand
sanitisers.