The Splash Lab TSL.420, Установка и обслуживание

Страница: 12 / 20

12
Once all nuts are tightened, test the
soap dispenser and allow soap to be
dispensed.
WARNING : Ensure all connections are
fully tightened to ensure full seal of the
soap.
TSL.420 MANUAL 12
9
Connect the sensor cables from the
dispenser head to the corresponding
cables from the soap foamer pump, and
the power supply cables.
Soap Installation
10
Connect the soap foamer pipeset to the
dispenser head, and the two inlet pipes
to 2 pipe fittings on the top of the soap
foamer unit.
11
Connect the soap pick-up pipe to the
bottom of the soap foamer unit, and fit
the opposite end of the pipe to the soap
reservoir.
how to install