STEP 4
Attach the Steering Link Connector to the
Front Axle Support arms, using Bolts, Washers
and Nuts. The connector should sit over the
axle as pictured.
STEP 5
Position the Central Front Axle Brace to the
Front Axle Support
Fix the Central Front Axle Brace to the Bed
using Carriage Bolt, Washer & Nut.
STEP 6
Slot the stepped arm of the Yoke onto the
protruding leg of the Front Axle Support (this
leg is stepped, so the Yoke will not go all the
way over the leg).
Position the straight arm of the Yoke between
the Centre Front Axle Brace & Front Axle
Support.
STEP 7
Fix the Yoke & Centre Front Axle Brace to the
Front Axle Support usng Bolt, Washer & Nut
Fix the Steering Link Connector to the Yoke
using Carriage Bolt, Washer & Nut.
