Sit the Cup Washer onto the Clamp Washer (Fig 8). Thread the Blade Nut onto the shaft. Please note this is a
Left-Hand threaded nut and should be rotated anti-clockwise, to secure (Fig 9).
Align the locking hole within the Metal Guard and Stepped Washer (Fig 10). Insert an Allen Key to stop the
shaft rotating (Fig 11) and firmly tighten the Blade Nut with a Spanner (Fig 12).
PRUNER ATTACHMENT
You will need to attach the Pruner head to the shaft (Fig 13).
Remove the 5mm Allen Key Bolts located in the Head and Clamp of the Pruner
Insert the Shaft into the Head, ensuring the splined driveshaft is housed into the splines of the Head.
Align the Fixing Hole located on the shaft with the hole within the Head and tighten with the 5mm Allen Key
Bolt, until secured.
Insert the second 5mm Allen Key Bolt into the clamp and tighten until secure.
1.
Shaft
2.
Pruner Head
3.
Fixing Hole
4.
Clamp
5.
5mm Allen Key Bolt x2
WARNING
The Chain has very sharp edges. Use protective gloves for safety.
WARNING
Ensure the Chain is placed in the correct direction.
Fig 8
Fig 9
Fig 10
Fig 11
Fig 12
Fig 13
