The Handy 1938138001, Инструкция по эксплуатации

Страница: 11 / 20

OPERATION
•
It is recommended you fix the machine using M10x30 bolts on level ground before operation.
•
Plan your work site. Work safely and save effort by planning your work beforehand. Have your
logs positioned where they can be easily reached. Prepare an area to stack the split wood or
load it onto a nearby truck or other carrier.
•
Prepare the logs for splitting. This splitter accommodates logs up to 106cm in length. When
cutting up limbs and large sections, do not cut sections any longer than 100cm. With 3 support
table positions for splitting for 56cm, 81.5cm 107cm in length. Insert the support table into the
position nearest the log length, and secure the support table with the locking hook.
•
Apply a thin coat of grease to the surfaces of the ram before operation this will increase the
durability of the ram.
DO NOT attempt to split green logs. Dry, seasoned logs split much easier and will not jam the
machine operation as much as green wood.
•
Route the cord from the power source to the splitter in a way that will not cause you to trip over
the cord, or damage the cord during work. Protect the power cord from impacts, pulling or
corrosive materials.
The permanent air breather allows air in and
out of the hydraulic oil tank.
•
While operating under extremely low temperatures, run the log splitter under no load for 15
minutes to preheat the hydraulic oil.
1
0
7
0
8
1
5
5
6
0