Towing
If the Locomotive fails at a distant location on the track it can be towed by implementing the following
steps.
1. Unload all passengers. The Operator must remain seated on the Locomotive Tender.
2. Set the Key Switch to the
ON
position, turn Light
OFF
, turn Smoke
OFF
.
3. Secure an appropriate rope or chain to the Locomotive Pilot, or couple a towing Locomotive to the
last car of the disabled train.
4. Rotate the Speed Control Knob to approximately the two o’clock position if the train is to be towed
forward, or the ten o’clock position if the train is to be towed in reverse.
5. Begin towing the train.
Crosshead
Assembly
Lubrication & Chain Adjustment
Required Tools
1/4” Square
Drive Ratchet
Wrench
1/4” Square x
3” Long
Extension
7/16” Socket
1/4” Socket
Phillips
Screwdriver
Locomotive and Tender Lubrication
#8-32 Hex. Head Screws
Figure 16
Locomotive Motor Drive Chain Lubrication Points
Tender Motor Drive Chain
& Drive Axle Chain
Lubrication Points
Small Slotted
Screwdriver
All Chains and the
Crosshead Assembly should
be lubricated after every fifty
miles of operation.
13
Содержание Pioneer Mogul (2-6-0)Steam Profile Locomotive
Страница 2: ......