Symptom Possible
Cause Solution
No power to Locomotive.
Discharged batteries.
Charge batteries. (See Page 5)
Loose battery connections.
Check battery connections and
tighten if necessary.
Locomotive moves very slowly. Low charge in the batteries.
Charge batteries. (See Page 5)
Excessive vibration from chain
drives.
Chain drives out of adjustment
on Locomotive and/or Tender.
Inspect chain drives and adjust if
necessary. (See Page 13)
Lack of lubrication on chain
drives.
Lubricate chain drives.
(See Page 13)
Headlamp does not illuminate.
Blown fuse.
Replace fuse (10 Amp).
(See Page 17)
Burnt out bulb.
Replace bulb.
No Locomotive sound.
Blown fuse.
Replace fuse (10Amp).
(See Page 17)
No Smoke Fluid in reservoir.
Fill Smoke Reservoir.
(See Page 8)
Poor connection between
Locomotive and Tender.
Check connections between
Locomotive and Tender.
(See Page 5)
Blown Fuse.
Check and if necessary, replace
fuse (10 Amp). (See Page 17)
Smoke switch set to off.
Set Smoke switch to on.
Batteries are not lasting as long
between charges.
Batteries are getting worn out
from use.
Replace batteries with two SKU
42602 (See Page 19)
Locomotive does not generate
smoke.
For Display Readouts, refer to Control Panel Functions (LCD Display Readouts).
Troubleshooting
12
Содержание Pioneer Mogul (2-6-0)Steam Profile Locomotive
Страница 2: ......