The Great American Train Company Pioneer Mogul (2-6-0)Steam Profile Locomotive Скачать руководство пользователя страница 13

Страница: 13 / 22

Figure 15

The LED will be ON solid when the Speed Control is in the Neutral Position. It will flash rapidly
when close to Neutral and more slowly the farther it is from Neutral or the faster the locomotive
is traveling in forward or reverse.

7. Use the Whistle as desired. Hold the Whistle lever down to activate the Whistle.

8. Use the Menu and Select Switches (See Figure 12) to program the Locomotive Sound Volume,

Bass Volume, Lamp Brightness, and other Locomotive functions as described in

Control Panel

Functions

9. Press the Emergency Stop Button only if an emergency stop is necessary (See Figure 12). The

Locomotive will immediately shut down and glide to a complete stop. The stopping distance will
vary with grade and load.

10. Verify the Speed Control is in the

Neutral Position

; then, release the Tender Brake and rotate the

Speed Control clockwise to start the Locomotive moving forward or counterclockwise for reverse
(See Figures 11 & 12).

11. While running the Locomotive, the LCD display will

provide information on the following (See Figure 15):

•

Hours of operation

•

Miles traveled

•

Battery charge

•

Capacity of the battery

•

Speed

•

Motor 1-2-3-4, Power (in watts) and Temp.

4. Set the Light Switch to the desired position. Toggle the Light Switch to turn the Locomotive

Headlamp

OFF

(See Figure 12).

5. Set the Smoke Switch to the desired position (See Figure 12). Smoke unit has a warm-up time of

five to eight minutes.

ON:

Smoke is always on.

OFF:

Smoke is always off.

IDLE:

Smoke is off when Locomotive is in motion (no chuffing), but on when Locomotive is

idle.

6. Set Bell Switch to the desired position. Toggle the Bell Switch to turn the Locomotive Bell

OFF

(See Figure 12).

12. To stop the Locomotive under normal conditions,

rotate the Speed Control back to the

Neutral

Position

and engage the Tender Brake after the

train has stopped (See Figures 11 & 12).

Содержание Pioneer Mogul (2-6-0)Steam Profile Locomotive























Результаты поиска

Содержание Pioneer Mogul (2-6-0)Steam Profile Locomotive

Отзывы:

Похожие инструкции для Pioneer Mogul (2-6-0)Steam Profile Locomotive

Бренды по названию

Популярные бренды

The Great American Train Company Pioneer Mogul (2-6-0)Steam Profile Locomotive, Руководство пользователя

Результаты поиска

Содержание Pioneer Mogul (2-6-0)Steam Profile Locomotive

Отзывы:

Похожие инструкции для Pioneer Mogul (2-6-0)Steam Profile Locomotive

Бренды по названию

Популярные бренды