8
get ready for
thefirstyears.com
™
Crisp & Clear View™/Dual View Digital Video Monitor
Quick Start Instructions
IMPortant
CHARGE BATTERY FOR 8 HOURS BEFORE INITIAL USE.
For plug-in use:
Connect one of the AC adapters to power jack and plug cord into
wall outlet.
You’ll find detailed instructions on the pages that follow. Please read
the Safety and Warnings Instructions on pages 2–3.
Set up the Child Unit
• Place unit 4 to 6 feet from child’s crib or play area.
• Connect remaining AC adapter to unit and plug into wall outlet.
Set up the Parent Unit(s)
For portable use:
Install the rechargeable battery pack provided. Battery
compartment is on back of unit. Loosen screw to release it, and slide cover off.
Insert plug on battery pack into connector inside compartment, then fit battery
into place. Replace cover and secure it by tightening the screw. Connect one
of the AC adapters to
power jack and plug cord into wall outlet.
To use
1. Push power button on Child Unit to turn it on .
2. Push power button on Parent Unit to turn it on.
3. Connection indicators on Parent Units should glow green indicating they are
connected.
4. Adjust camera position to ensure desired view is displayed.
5. Press + or – to adjust the volume of the Parent Unit.
Note:
Display on the Parent Unit will go blank after 30 seconds if unit is powered
by batteries. This is a normal power-saving feature. Pressing any button on
Parent Unit will reactivate the display. This feature can be turned off through
menu in Parent Unit.
Before returning this product to the store for any reason, please contact our
Parent Service Center at 800-704-8697
Often, we can provide helpful tips and instructions to resolve your problem
quickly over the phone or by email.