12
get ready for
thefirstyears.com
™
Crisp & Clear View™/Dual View Digital Video Monitor
To turn the Parent Unit(s) off
Hold down the power button for 2 seconds or until the power light goes out.
To turn the Child Unit off
Hold down the power button for 2 seconds or until the power light goes out.
Tip:
A loud screeching sound indicates the Parent Unit is too close to the Child
Unit. To avoid this noisy feedback (which is common with audio devices), lower
the volume on the Parent Unit (or turn it off) when entering your child’s room (or
any room where you have set up the Child Unit).
IMPortant
THE POwER INdICATOR ON THE PARENT UNIT(S) wILL GLOw REd wHEN
BATTERY POwER IS LOw. BATTERIES IN THE PARENT UNIT SHOULd BE
RECHARGEd AS SOON AS POSSIBLE.
Display Sleep Mode (Display Disappears after 30 seconds)
• When the Parent Unit is being operated on battery power, the display will go
into sleep mode automatically. This means the screen will go blank after 30
seconds. It will always turn back on whenever sounds picked up by Child Unit
indicate the baby is active or crying.
• To turn display back on at any time: Press any button.
• To return the display to sleep mode more quickly than 30 seconds (and save
even more battery power): Press the power button quickly. The screen will go
blank.
• Sound will always be transmitting even when the display is blank, unless unit is
turned off.
Note:
The unit will not go into Display Sleep Mode when it is plugged into the AC
adapter. The Display Sleep Mode can be turned off during portable (battery) use
via the Menu.
Sound Activation
• The display will remain blank when sound level in the camera location is low.
• Once sound level from the Child Unit indicates child may be crying, or making
loud noises, the image will be displayed.
Range
The distance you can separate the units and still maintain a connection will
vary based on the layout and construction of your home. To test the Monitor’s