CHARGING
•
Fully charge the product before using the appliance for the first time, or if it has not
been used in quite a while. (2-hour charging time)
•
If fully charged, you can use the appliance for ~75 minutes
•
Insert the C-plug into the waterproof charging port of the shaver and the USB end to
your charging source (such as a USB device or using the USB wall adaptor) and the
light
will come on to indicate that the appliance is charging
•
Charge the appliance for 2 hours until the battery indicator light turns off. Once the
battery indicator light turns off, the unit is fully charged.
•
When the unit is fully charged, the battery
and light
symbols are on all the
time
•
Note: Only extended USB-C type adaptors will charge shaver. Normal USB-C (android,
phone etc.) will not charge chaver.
•
When a customer charges the unit with the wrong voltage (over 5V), three indicators
will quickly flash for 10 seconds. Unit will not be charge because of battery protection.
Note:
The unit can usually be used right out of the box because it comes partially-charged. It
takes 2 hours to fully charge the appliance. Each full charge gives you approximately 75
minutes shaving time. If it takes you 5 minutes every time to shave, then you should get about
15 shaves from a full charge. It is recommended to let the unit battery fully drain before
recharging as this will extend battery life of the shaver. If shaver battery life is getting low
while using the unit, you can plug it in to finish shaving.
