3
ASSEMBLY INSTRUCTIONS
Step 1.
The upright tube with the connection wire is the right-hand tube. Connect the wire
as shown in FLG 1.
Assemble each handle to the main frame with bolts provided – FLG 2
The cables are contained in the frame, so take care not to trap the wire when
inserting the bolts. (This first step may have already been carried out in the
factory).
Step 2.
Connect the upright tubes to the handrail as shown FIG 4. You may need to pull the
arms apart slightly to fit. This is perfectly normal. Insert all 4 bolts loosely at first, then
tighten once fitted. Connect the computer cables.
FIG
Step 3.
Under the console, insert the securing knob and tighten to lock the control panel in the
correct position FIG 5. Place the safety stop key onto the console FIG 6.
Step 4.
Hide the top securing bolts with the plastic covers provided.
FIG
s
FIG 6
