The Alien Pro ALIEN504, Руководство по эксплуатации

Страница: 57 / 73

57
6.14 PTZ Setup
There is one RS-485 port on the DVR rear panel used for PTZ control.
6.14.1 PTZ RS485 Connection
Connect DVR/DVS RS-485 port Pin “T+” with PTZ Pin “A”. Connect DVR RS-485
port Pin “T-“ with PTZ Pin “B”. If DVR RS-485 port is an RJ45 interface, please
refer to DVR user manual for the RS-485 pin definition.
6.14.2 PTZ Settings
Configure the RS-485 parameters to match your PTZ protocol. In the main menu,
select the PTZ setup option.
PTZ menu Options:
• Select channel: Select a PTZ camera.
• RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
These parameters must be the same as those required by the PTZ protocol.
• PTZ address: Each PTZ has a different address.
• PTZ type: The DVR has the following PTZ protocols:
YouLi, LinLin-1016, LinLin-820, Pelco-p, DM DynaColor,
HD600,
JC-4116, Pelco-d WX, Pelco-D, VCOM VC-2000,
NetStreamer, SAE/YAAN, Samsung, Kalatel-312, CELOTEX,
TLPelco-p, TLHHX-2000, BBV, RM110, KC3360S,
ACES, ALSON, INV3609HD, Howell, Tc Pelco P,
Tc Pelco D, AUTO-M, AUTO-H, ANTEN, CHANGLIN,
DeltaDome, XYM-12, ADR8060, EVI-D30, DEMO-SPEED,
DM-PELCO-D ST832, LC-D2104, HUNTER, A01,
TECHYIN, WEIHAN, LG, D-MAX, Panasonic,
KTD-348, infinova, PIH-7625, LCU, DennarDome,
VICON, TKC676, YAAN_NEW DL_NVS_1Z, i3DVR.
Other PTZ protocols will be added with the new firmware.
Note: If you select Pelco-P protocol set the dome address one number higher than the
DVR setting. For example, if camera ID is 2, the DVR PTZ address is set as ID 3.