17
Re-installing the Mesh and Fabric Filters
• Ensure that both the Mesh Filter and Fabric Filter are completely clean
and dry before re-installing.
• Push the Fabric Filter back onto the Filter Plate (see 1).
• Place the Mesh Filter over the Fabric Filter and connect to the Filter Plate
by twisting the Filter Plate clockwise until it locks (see 2).
• Place the Filter Plate (with Mesh and Fabric Filters connected) into the
Dust Cup (see 3).
• Hook the Dust Cup onto the Dust Cup Hook (see 4).
• Connect the Dust Cup to the Dust Cup Clip (see 5).
Make sure that the Dust Cup is securely connected to the Main Body.
CLEANING ACCESSORIES
• After every use, disconnect the Accessories and inspect for any accumulation
of
dust and dirt. If necessary, clear away any debris.
• Inspect the underside of the Triangular Swivel Vacuum Head, the Wheels and
the Axles for any debris that may be entangled and remove.
STORAGE
• Store the X5 VAC in a dry, cool area, away from children, at room
temperature.
• The X5 VAC can be stored upright or horizontally.
• Place and store the Accessories in the Accessory Bag (optional).
D. HOW TO USE THE X5 VAC
(continued)
1
2
3
5
4
!
IMPORTANT
14
• Use or connect the other end as suggested (see Table 1 and 2 in “How to Use Accessories/Optional
Accessories” sections).
• To turn the X5 VAC on, slide the Power Switch ON.
• Hold the Handle and proceed with vacuum cleaning by moving the Dust
Cup Nozzle (or the suction opening of any of the accessories) in close
proximity over the area or object to be vacuumed in an even and slow manner.
• After use, slide the Power Switch OFF.
• In between use, the X5 VAC can be placed upright (see 1) or
horizontally (see 2).
Do not press down on the Dust Cup or Dust Cup Nozzle with
excessive force when connecting or using any of the accessories. This may cause damage to the Dust Cup.
D. HOW TO USE THE X5 VAC
(continued)
1
2
!
CAUTION
