Thane Fitness X5 VAC Скачать руководство пользователя страница 13

19

E. HOW TO USE OPTIONAL ACCESSORIES

LIQUID LIFTER

INSTRUCTIONS FOR USE

•  The Liquid Lifter is an attachment that connects to the Main Unit. It can be used with the  
  Suction Tool to activate and clean soiled areas and to lift wet spills. Alternatively, it can be  
  used with the Window Cleaner attachment to clean surfaces such as windows, mirrors and  
  glass tops. Liquids and debris are deposited into the Storage Tank of the Liquid Lifter.

 

 

         Do not use the Liquid Lifter while the X5 VAC is charging. Ensure the X5       

 

VAC is disconnected from the Charger before using the Liquid Lifter.  

 

 

         When using the Liquid Lifter, keep it anywhere between these two positions:  

 

position A, position B (depending on the cleaning surface).  Once liquid has been 

 

absorbed into the Storage Tank, do not place the Liquid Lifter upright or tilt it backwards  

 

or lay it on its side (as shown as position C, D or E) as liquid may leak from the Storage Tank.

 

 

         While using the Liquid Lifter, if any liquid leaks from the Motor Chamber or  

 

the Storage Tank, immediately stop, turn OFF the Power Switch and investigate the cause  

 

of the problem (see Trouble Shooting). 

Preparing for Use

 

Connect the Liquid Lifter to the Main Body as follows:

•  Disconnect the Dust Cup, including the Filter Plate with Mesh and Fabric Filters from the  
 

Main Unit. 

•  Connect the Liquid Lifter to the Main Body in the same way that the Dust Cup is 
 

connected to the Main Unit (see 1).

•  Connect the Suction Tool or Window Cleaner to the inlet pipe of the Liquid Lifter (see 1)   
 

IMPORTANT: Ensure the Liquid Lifter is empty before each use.

1

!

WARNING

!

WARNING

!

WARNING

Inlet Pipe

12

Table 1. Use of Accessories

D. HOW TO USE THE X5 VAC 

(continued)

Intended Use

Connect one or both Pipes to access hard to reach, or high areas. Use in conjunction with any of the 
other cleaning accessories.

Use on carpets, rugs, stairs as well as hard surfaces such as floors.
When cleaning carpets, switch the Floor Blade to the 

UP

 position.  

When cleaning hard surfaces, switch the Floor Blade to the 

DOWN

 position.  Typically, the Triangular 

Swivel Vacuum Head is connected to one or both Extension Pipes. It can also be connected directly to 
the Dust Cup Nozzle for close-up vacuuming.

Accessory

Extension Pipe(s)

Triangular Swivel

Vacuum Head

Position A

Position B

Position E

Position D

Position C

Содержание X5 VAC

















Отзывы: