NOTES:
INTRODUCTION TO YOUR H2O X2™ APPLIANCE
The H2O X2™ appliance is designed to thoroughly clean floor surfaces, such as marble, ceramic, carpet, stone, linoleum, sealed hardwood floors and
parquet.
Test the H2O X2™ appliance on a small isolated area of your flooring prior to overall use on floor surfaces. The heat and steam action may remove the
wax on surfaces treated with wax. Do not let unit stand on any wood or heat-sensitive floors for an extended period of time. Water marks, discoloration or
damage to the floor surface can occur if the unit is left operating too long in one place. When using on vinyl, linoleum or any other heat-sensitive floors,
use extra caution. Too much heat can melt glue in the flooring. Use only on laminated flooring that has been laid professionally and without any gaps or
cracks that would permit the entry of moisture. Not all floor types are suitable for steam cleaning. Always check the use and care instructions of your flooring
manufacturer or distributor before using the H2O X2™ appliance. When in doubt, consult a flooring specialist.
For Best Results:
- Sweep or vacuum floor prior to using the H2O X2™ appliance.
- To avoid accumulation of excess water, the Microfiber Cloth must
be clean and dry before use.
- Never steam in one spot for too long.
- Do not put hands or feet or any other parts of your body under the steam mop.
- It is normal to hear a pulsing noise during use, indicating that the mop is producing steam.
- There may be some minor “spitting” of water mixed with the steam.
- Never leave the H2O X2™ appliance on a heat sensitive floor after use, wait until the unit has cooled down and is unplugged.
3
IMPORTANT
!
Start the assembly of your H2O X2™ appliance by completing steps 1, 2, and 3.
Step 4:
Attach the floor cleaning cloth by placing the cloth under the Mop Head. Align fastening strips of the cloth with the gripping strips on the
bottom of the Mop Head. Press to fit together.
Step 5:
When using the H2O X2™ appliance on carpeting or rugs: Place the Mop Head with Microfiber Cloth in place, on top of the Carpet Glider as
illustrated in Fig. 6. Do not attempt to use the H2O X2™ appliance on carpeting or rugs without the Carpet Glider in place.
Never use the Carpet
Glider on surfaces that are prone to scratching.
Make sure that the unit is unplugged from an electrical outlet and the Power Switch ( O / I ) is in the “OFF” ( O )
position before assembling the unit or changing the accessories.
HOW TO ASSEMBLE YOUR H2O X2™ APPLIANCE
!
CAUTION
1
5
3
2
4
Содержание H2O X2 KB - 016
Страница 1: ...Model KB 016...
