Thames & Kosmos SUPERSPHERE, Руководство по эксперименту

Страница: 15 / 64

13
PROGRAMMING MODE
PROGRAMMING SOUNDS
1. Press the notes command icon and the
sound
programming window (J) appears.
2. In the sound programming window, you can
create a command to make sounds. You can
choose the pitch (Do, Re, Mi, Fa, Sol, La, Si, and
Do) and the duration (0 to 5 seconds) for each
note command.
3. Press the green check mark button and the
note
block (K) appears in the program segment.
In this way, you can program a simple melody
with multiple note blocks that will play when the
program segment runs.
PROGRAMMING PAUSES
1. The last command option is to add a pause, or
rest, to the program. Press the rest command icon
and the
rest programming window (L) appears.
You can choose the duration (0 to 5 seconds) of
the pause in the program. Press the green check
mark button and the
rest block (M) is added to the
program segment.
DELETING COMMANDS
To delete a command block, press the block you
want to delete to open its programming window.
Then press the
trash button (N) in the bottom corner.
WRITING A COMPLETE PROGRAM
Following the previous instructions for adding
commands, you can now go and write programs for
all of the segments. You can think of the different
actions you want your robot to perform when the
sound sensor detects different numbers of claps.
Don’t be afraid to try a lot of different ideas and
play around with different combinations of
command blocks in different sequences.
J
L
K
M
N
Programming the Robots