Sensor assembly
Control unit
Head assembly
with connector
Slide the control unit into the
rail as far as it will go. Make
sure that the ports of the control
unit are facing outward.
Falsch
Richtig
F
Klick
Done
Before attaching the connector to the head
assembly, lay the infrared sensor cable down flat
across the underside of the head as shown.
Slide the head assembly onto the rail
of the chassis as far as it will go. Make
sure that the narrow part of the head
assembly faces forward. (The wires
are not shown.)
18
9
10
7
8
ASSEMBLING THE ROVER
Arrange the
sensor and head
assembly cables
as shown.
Connect the cables to the
control unit as follows:
Sensor
LED
Motor,
right
Motor,
left
Battery
6
To mount the connector to the
head assembly, push the two
tabs together, and position the
connector between the two
supports as shown. Then let the
tabs snap outward.
Connector
Connector
Head
assembly
Head
assembly
Push in
Push in
