manualshive.com logo in svg

Thames & Kosmos 623715, Руководство по эксперименту

Поделиться
Скачать
Thames & Kosmos 623715 Скачать руководство пользователя страница 35

18

19

20

17

21

22

23

24

17. Now mount the four tire wheels (15) onto the front and rear axles. 
For looks, add a large gear wheel (6) to the outside of each one. 

19. At the front, a short rod (4) stabilizes the construction. It attaches 
to the two upper frames by the two anchor pins (26). 

21. At the rear as well, reinforce the construction with a short rod (4) 
attached to the two long upper frames.   

23. Then attach this structure at the front to the two long upper frames. 
You will have to push the two rods out a little bit. 

18. For the power transmission between engine shaft and drive shaft, 
mount a medium sprocket wheel (10) on the engine shaft and a large 
sprocket wheel (11) on the drive shaft.

20. The lower chain is made out of 43 chain links (29). Before attaching 
it, adjust the two sprocket wheels so they form a straight line.

22. For the front section, connect two short rods (4) with one short 
frame (3). You will need to use two anchor pins.

24. Finally, mount the battery holder (22) with the solar module (23) to 
the frames at the front. Then connect the electricity cables (20/21) to 
the engine.

33

Содержание 623715





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды