1
2
3
5
4
6
7
8
1. Insert the engine shaft (19) into the solar engine (24). The short end
of the shaft goes in the engine block. Then mount a small sprocket
wheel (9) on the shaft.
2. The solar engine is mounted on a long frame (2). The engine’s
anchor pins go in the second, fourth, and sixth holes from the right.
3. From the other side, attach a second long frame (2) to the engine.
Press both frames together firmly, so the assembly is stable.
4. The anchor pins on the long frames serve to attach another long
frame (2), which you mount vertically.
5. Another long frame serves to provide additional strength. This one is
set right on top of the two long frames with the engine.
6. Now we’ll prepare the axles. Take two long axle shafts (16) and insert
a small gear wheel (8) over the short end of each one.
7. Push the two axle shafts through the outer holes of the frames at the
bottom. The gear wheels should be on the side away from the engine
shaft.
8. Insert a small gear wheel (8) and a medium sprocket wheel (10) on
the other side. The teeth of the sprocket wheel should mesh with those
of the wheel on the engine.
15
