Thales MissionLink, Руководство по установке, Страница: 26 / 51

2-8
Installation Guide 84465 Rev. B
Table 2-3 Installation Kit, Terminal Unit (PN 1100789-501)
Item
Number
Description Part Number Qty
1 Screw Phil Pan HD 18-8 M6x1x16mm SS
BLK Oxide 82767-001 4
Screw Phil Pan HD 18-8 M6x1x20mm SS
BLK Oxide 82768-001 4
2 Washer Split Lock M6 (DIN 127B) A4 SS
BLK Oxide 71304-001 4
3 Washer Flat M6 6.4mm ID x 12mm OD x
1.6mm THK SS BLK Oxide 71298-001 4
4 Nut Lock w/Nylon Insert M6x1 18-8 SS 75656-001 4
1. Use the template information provided in Appendix B to create the appropriate hole
pattern in the desired mounting surface for the chosen mounting hardware.
NOTE
Hole sizing and provided hardware are shown for through hole
mounting as shown in Appendix B. User may mount antenna
with other hardware at their discretion and own risk.
NOTE
Terminal Unit can be mounted in any orientation but for best
performance, it is recommended that it is mounted horizontally
with the Thales logo facing up. This will give the best
protection against any spills or dripping water and allows for the
best heat transfer.
2. Position the pattern to avoid interferences with the antenna or coaxial cable connection to
the antenna.
3. Assemble screws with split lock and flat washers as shown in Figure 2-3 and torque to
4.5 Ft. Lbs. (6 Nm).
4. Connect the provided Wi-Fi antenna, and install the SIM Card (from service provider)
into slot.
a. Open the SIM Card protective cover by pulling it away from the TU, exposing the
SIM card slot. (Figure 2-4).