manualshive.com logo in svg

Thailand juicer ReBoot MASTER 6000, Руководство пользователя, Страница: 17 / 24

Поделиться
Скачать
Thailand juicer ReBoot MASTER 6000 Скачать руководство пользователя страница 17

1

Switch off and unplug the power cord from 
the wall outlet.

2

Turn the drum lid counter clockwise 
to open.

3

Remove the juicing screw, strainer and 
rotation wiper unit from the juicing bowl. 
Clean with provided brush.

4

Place the juicing bowl under running water 
and unplug the compression silicone plug
to clean the pulp spout.

•

  Extract all the remaining pulp in the juicing 

    bowl before stopping the juicer.

•

  For easier clean up, operate the juicer for 

    an additional 30 seconds after the juice is 
    extracted.

Note:  

•

  Failure to clean the juicer immediately after  

    use can make it difficult to disassemble, 
    and any build up of residue may result in    
    poor performance in the future.

•

  Thoroughly dry the bottom of the juicing 

    screw where it connects to the metal 
    cylinder shaft on the base. 

Note:  

•

  Soak the juicing bowl in a solution of 

    warm water with baking soda or a little bit 
    of bleach to clean any excess build up. 

TIP:   

•

   When moving the appliance, do not lift by

    grabbing the feeding tube. Always lift the
    appliance by grabbing the base or handle.

Note:  

Remove the juicing bowl assembly by 
lifting it off the motor base.

HOW TO DISASSEMBLE AND CLEAN

1

Switch off and unplug the power cord from 
the wall outlet.

2

Turn the drum lid counter clockwise 
to open.

3

Remove the juicing screw, strainer and 
rotation wiper unit from the juicing bowl. 
Clean with provided brush.

4

Place the juicing bowl under running water 
and unplug the compression silicone plug
to clean the pulp spout.

•

  Extract all the remaining pulp in the juicing 

    bowl before stopping the juicer.

•

  For easier clean up, operate the juicer for 

    an additional 30 seconds after the juice is 
    extracted.

Note:  

•

  Failure to clean the juicer immediately after  

    use can make it difficult to disassemble, 
    and any build up of residue may result in    
    poor performance in the future.

•

  Thoroughly dry the bottom of the juicing 

    screw where it connects to the metal 
    cylinder shaft on the base. 

Note:  

•

  Soak the juicing bowl in a solution of 

    warm water with baking soda or a little bit 
    of bleach to clean any excess build up. 

TIP:   

•

   When moving the appliance, do not lift by

    grabbing the feeding tube. Always lift the
    appliance by grabbing the base or handle.

Note:  

Remove the juicing bowl assembly by 
lifting it off the motor base.

HOW TO DISASSEMBLE AND CLEAN

17

Содержание ReBoot MASTER 6000

























Отзывы:

Нет отзывов