©Copyright Task Force Tips, Inc. 2002-2011
LIX-512 July 25, 2011 Rev08
5
3.2 PART IDENTIFICATION AND MODELS
QTY
PART
DESCRIPTION
2
VT50-13NT
1/2-13 HEX NUT
1
XG486
SADDLE BRACKET
1
XG476
4-1/2 U-BOLT 1/2 DIA.
3.3 PLATE BRACKET INSTALLATION
This kit may be used in either new or retro-fi t
installations. The top plate with its bracket may
be bolted above or below an existing deck. The
lower saddle bracket is installed as previously
shown. Both brackets must be used. To
minimize the stress on the brackets they should
be as far apart as possible when clamped to
the Extend-A-Gun tube. Please refer to the
Side Loads at Mounting Points Diagram and
make sure the mounting points can withstand
these forces. Use Loctite®, supplied in kit on
all threads, torque bolts to 40-45 ft-lbf and nuts
on U-bolts to 36-40 ft-lbf.
QTY
PART
DESCRIPTION
2
VT50-13NT
1/2-13 HEX NUT
1
XG485
MOUNTING PLATE
1
XG476
4-1/2 U-BOLT 1/2 DIA.
