Pagina 27 di 35
AD1100TE-STD.EN-00 - Subject to change without notice
TFT DryAir
Description Parameters
PARAMETERS DIRECT AND USER
Menu
Parameter
Description
Unit of
measurement
Default
Value
Set
Value
SEt
St01
Set-point % relative humidity
%
20,0
St03
Set-point post-treatment temperature
°C
15,0
St05
Set-point pre-treatment temperature
°C
10,0
rC01
Set-point reactivation temperature
°C
120
Unit
trC
Indication value reactivation temperature [°C]
°C
Only vis.
Y_rC
Indication value % reactivation control
%
Only vis.
Y_3P
Indication value % position of 3-point burner valve
%
Only vis.
InrH
Indication value % relative humidity, absolute humidity or DewPoint
%-°C-g/Kg
Only vis.
HAbS
Indication value of absolute humidity calculated if the probe of RH% and post-
treatment temperature probe.
g/Kg
Only vis.
HdP
Indication value of DewPoint calculated if the probe of RH% and post-treatment
temperature probe.
°C
Only vis.
tPrE
Indication value °C temperature pre-treatment
°C
Only vis.
tPOS
Indication value °C temperature post-treatment
°C
Only vis.
Y_U1
Indication value % control signal of pre-treatment valve
%
Only vis.
Y_U2
Indication value % control signal of post-treatment valve
%
Only vis.
Software Version 1.5.0 (FW 412.20)
