46
Minutes
(flashing)
Hours
(flashing)
2.
Use the
+
key to set the time zone. The range runs from 0, -1, -2…-12, 12, 11, 10… 2, 1, 0,
in consecutive 1-hour intervals.
3.
Confirm with the
SET key and enter the
Manual Time setting
.
MANUAL TIME SETTING
In case the weather station is not able to detect the radio-controlled time (DCF time) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work
as a normal Quartz clock.
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute setting.
3.
The minute will be flashing. Press the + key to just the minutes.
4.
Confirm with the SET key and enter the
Calendar Setting
.
