23
„°C“ starts flashing. With the + or - button you can select between
„°C“ or „°F“ as the temperature unit.
Time setting:
The hour digits start flashing. With the + or - button you can set the
hours.
Press SET button again and set the minutes by the same way.
Date setting:
The year starts flashing. With the + or - button you can set the
year.
Press SET button again and the month starts flashing. With the +
or - button you can set the month.
Press SET button again and the day starts flashing. With the + or -
button you can set the day.
Main reset (resetting back to factory settings):
“FAC” appears on the text display. If the “OK/MAX.MIN.” button is
now pressed and held for three seconds, the KlimaLogg Base
deletes all settings and recorded data. The KlimaLogg Base is
reset to factory settings. After the “OK/MAX.MIN.” button has been
pressed and held for three seconds, the progress of the reset is
shown in % on the memory display. The KlimaLogg Base
automatically restarts when the reset is complete.
Note:
Note that through the main reset also all recorded data will deleted. If
necessary, please ensure that there is no relevant data on the.
If the device shows a malfunction, we recommend that you firstly check
the batteries and try a normal reboot of the unit. If this does not help, we
recommend that you do the main reset.
RECORDING INTERVAL SETTING:
Press SET button in normal mode.
HIST appears on the text display.
The recording interval indication next to symbol REC starts
flashing.
Default interval 0:15 HR:MIN correspond 15 minutes.
The “+” or the “-” button allows you to select the recording
intervals listed below:
