22
After you press and hold the SET button for three seconds, you are
automatically taken to the first setting option for basic settings, the
contrast setting. Pressing the SET button once again takes you to the
next setting option.
If no button is pressed for 20 seconds, the KlimaLogg Base automatically
switches back to the normal view. You can return to the normal view at
any time by pressing the “HIST” or the “ALM” button.
Note:
Changes at the setting-mode require no additional confirmation and are
automatically saved when you leave or go further to the next setting.
If you press and hold the “+” or “-” button, you are quickly taken through
the possible settings (time and date settings).
LCD-contrast:
„LCD“ appears on the text display and the default „5“ starts
flashing. With the + or - button you can select between 0 until 7 as
the LCD contrast.
Alarm sound ON/OFF:
„SOUND“ appears on the text display and the default “ON” starts
flashing. With the + or - button you can deactivate (OFF) or activate
(ON) the alarm sound. If the alarm sound is activated, the alarm
symbol will appear (bell) in the toolbar. If the alarm sound is
deactivated, the alarm symbol does not appear.
Note:
This setting is related to the alarm sound only. Alarms that have been
set, continue to be registered. Also they are shown on the display as
well. Only the sound is activated or inactivated by this setting in case of
an alarm.
12/24-Hour format:
T
he default „24 h“ starts flashing. Also the current time will be
shown in the display. With the + or - button you can select between
12 hr or 24 hr time format. If you select the 12 hr time format, AM
or PM appears in the display additionally.
Temperature unit (°C/ °F):
