21
20
AIRCO
2
NTROL COACH
– CO
2
Monitor
AIRCO
2
NTROL COACH
– CO
2
Monitor
• “Auto” is displayed shortly after a successful connection, then “- - - -"” The backlight turns on.
• The black bars disappear one by one.
• The device is ready for use.
• The actual measurements will appear on the display: CO
2
concentration, temperature, humidity.
• The clock must be set to the current time in setting mode.
7. Settings
7.1 Selection of the multi-function display illumination
• The device has a multi-function display illumination in different colours. Depending on the setting, the
illumination colour is used to evaluate and interpret the current CO
2
measured values.
• You can select your respective setting by pressing the
MODE
button.
• Wait some seconds until the display returns to normal mode to confirm the setting.
• The following four settings are available:
7.1.1 „Auto”
(default)
In this mode, the display colour changes automatically in smooth transitions between the 3 colour
shades, depending on the current reading of the CO
2
levels.
Green:
Optimal air quality:
The CO
2
concentration is below 800 ppm.
Yellow: Medium air quality:
The CO
2
concentration is between 800 ppm and 1400 ppm.
Red:
Poor air quality:
The CO
2
concentration is over 1400 ppm.
5. Elements
5.1 Display (Fig. 1)
A 1:
CO
2
indication
A 2:
CO
2
history of the last 24 hours
A 3:
Time
A 4:
Temperature
A 5:
Humidity
5.2 Buttons (Fig. 1)
B 1:
MODE
button
B 2:
+
button
5.3 Housing (Fig. 2+3)
C 1:
Micro USB port
C 2:
Mounting holes
6. Getting started
• Insert the supplied USB cable with the micro USB plug into the provided opening on the device. Connect
the device via the USB cable only to a suitable USB power source.
TFA_No. 31.5009_Anleit_12_20 17.12.2020 18:22 Uhr Seite 11
