background image

19

18

AIRCO

2

NTROL COACH 

– CO

2

Monitor 

AIRCO

2

NTROL COACH 

– CO

2

Monitor 

• The device and the USB cable must not come into contact with water or moisture. Only suitable for

indoor use.

• Do not use the device if the housing or the USB cable are damaged.
• Operate the device out of reach of persons (including children) who cannot fully appreciate the potential

risks of handling electrical equipment.

• Unplug the device if any fault occurs or if the device is not used for a long period of time.
• Route the USB cable lead so that it does not come into contact with sharp-edged or hot objects.

Important information on product safety!

• Do not expose the device to extreme temperatures, vibrations or shocks. 
• To avoid damage to the electronics, do not remove the protective cover or insert sharp object through

the ventilation slots.

EMC/RFI

• Protect the unit from EMI (Electro Magnetic Interference) from induction heaters, microwave ovens and

Electro Static Discharge. Readings may be affected if the unit is operated within a radio frequency elec-
tromagnetic field strength of approximately 3 volts per meter. The performance of the instrument will not
be permanently affected.

3. Range of application and all the benefits of your new instrument at a glance

• For monitoring the CO

2

concentration in buildings, where people are present, eg: schools, offices, public

facilities

• Indication of actual CO

2

concentration and history value of the last 24 hours

• Multi-function display illumination in different colours
• Indication of time, temperature and humidity 
• Micro USB port (5V) to power via PC or power adapter

4. For your safety

• This product is exclusively intended for the range of application described above. It should only be used

as described within these instructions. 

• Unauthorized repairs, alterations or changes to the product are prohibited.

Caution! 

Risk of electrocution!

• Connect the device via the USB cable only to a suitable USB power source such as a computer, USB

power adapter (DC 5V 

300mA).

TFA_No. 31.5009_Anleit_12_20  17.12.2020  18:22 Uhr  Seite 10

Содержание AIRCO 2 NTROL COACH







Отзывы: