35
34
WEATHER BOY –
Wireless weather station
• Press the
RESET
button in the corresponding transmitter's battery compartment. The transmission of the outdoor data will
take place immediately.
• The outdoor values and the channel number will be shown on the base station display. If you have installed more than one
outdoor transmitter, press the
+/CH
button on the base station to change between the channels 1 to 3.
• You can also choose an alternating channel display. When pressing the
+/CH
button, a circle symbol will appear after the
last registered channel (1 to 3). To deactivate the function press the
+/CH
button again.
• After a successful installation close the outdoor transmitter's battery compartment carefully.
13. Positioning and mounting of the base station and the transmitter
• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger incorrect measure-
ment and continuous humidity damages the electronic components needlessly.
• Place the base station in any room of the house. Make sure to avoid the vicinity of any source of interference such as com-
puter screens, TV sets or solid metal objects.
• Once the desired location is chosen, check whether the transmission from the transmitter to the base station is possible
(transmission range of up to 60m in open areas). Within solid walls, especially ones with metal parts, the transmission
range can be reduced considerably.
• If necessary, choose another position for the outdoor transmitter and/or receiver.
• Once the transmission is successful, you can wall mount the transmitter.
14. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents. Protect it from moisture!
• Remove the batteries from all devices if you do not use the products for a long period of time.
• Store the devices in a dry place.
WEATHER BOY –
Wireless weather station
14.1 Battery replacement
• As soon as the battery symbol appears on the display of the base station beside the outdoor temperature, change the bat-
teries of the outdoor transmitter.
• Change the batteries of the base station, when the battery symbol appears on the indoor values display.
•
Please note:
When the batteries are changed, the contact between the transmitter and the receiver must be restored – so
always insert new batteries into both devices or start the manual search for the transmitter.
15. Trouble shooting
Problem
Solution
No indication
➜
Ensure the batteries' polarities are correct
on the base station
➜
Change the batteries
No transmitter reception
➜
No transmitter installed
Display "- -"
➜
Check the outdoor transmitter's batteries (do not use rechargeable batteries!)
for channel 1/2/3
➜
Restart the transmitter and the base station according to the manual
➜
Start manual search for the outdoor transmitter: Press the
+/CH
button on the base station
for 3 seconds and then the
RESET
button in the transmitter's battery compartment
➜
Choose another place for the outdoor transmitter and/or the base station
➜
Reduce the distance between the outdoor transmitter and the base station
➜
Check if there is any source of interference
No DCF reception
➜
Activate DCF reception in setting mode (RC ON)
➜
Press and hold the
–
/WAVE
button for 2 seconds and start the initialisation manually
➜
Wait for an attempt reception during the night
➜
Choose another place for your product
TFA_No. 35.1159_Anleitung_ 17.06.2020 18:09 Uhr Seite 18
