Textron Jacobsen 3500, Руководство пользователя и руководство по обслуживанию

Страница: 42 / 56

GASOLINE UTILITY VEHICLES
Page 24
Owner’s Manual and Service Guide
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
DIRECTION SELECTOR
✓
Check attachment, adjust as required
ENGINE
✓
Check for unusual noise, vibration, acceleration, oil leaks
STARTER/GENERATOR BELT
✓
Check for tension, wear, cracks
COOLING FAN
✓
Check for build-up of foreign matter inside blower housing and fins, clean if required
STEERING ASSEMBLY
✓
Check for abnormal play, tightness of all hardware
TIE RODS/LINKAGES
✓
Check for excessive play, bent components or loose connections
REAR AXLE
✓
Check for leakage, add SAE 30 oil as required
QUARTERLY - 50 HOURS
(includes items listed in previous tables & the following)
FRONT AXLE
✓
Check for damage to axle and loose or missing hardware
FRONT SHOCK ABSORBERS
✓
Check for oil leakage and loose fasteners
FRONT SPRINGS
✓
Check for loose hardware, cracks at attachments
FRONT WHEEL ALIGNMENT
✓
Check for unusual tire wear, align if required
PARKING (PARK) BRAKE
✓
Check for bent/binding linkage rod
✓
Check for damage or wear to latch arm or catch bracket
♦
Lubricate, use light oil. DO NOT LUBRICATE CABLES OR BRAKE LATCH
REAR SHOCK ABSORBERS
✓
Check for oil leakage, loose mounting hardware
ENGINE ELECTRICAL SYSTEM
✓
Check coil/spark plug wires for cracks/loose connections
FUEL SYSTEM
✓
Check for leaks at tank, cap, lines, filters, pump, carburetor
✓
Check fuel lines for cracks/deterioration
THROTTLE/GOVERNOR LINKAGE
✓
Check operation and governed speed
SEMI-ANNUAL - 125 HOURS
(includes items listed in previous tables & the following)
DIRECTION SELECTOR
✓
Check for wear and smooth movement (lubricate shaft with light oil if required)
KING PINS
✓
Check for excessive play and tightness of retaining nuts
♦
Lubricate, use wheel bearing grease
STEERING ASSEMBLY
♦
Lubricate linkage, use wheel bearing grease
REAR AXLE
✓
Check for unusual noise and mounting hardware
AIR CLEANER
✓
Check filter element, clean/replace as required
ANNUAL - 250-300 HOURS
(includes items listed in previous tables & the following)
FRONT WHEEL BEARINGS
♦
Adjust, see Technician’s Repair and Service Manual
♦
Pack, use wheel bearing grease
REAR AXLE
✓
Check lubricant, if oil seepage is evident, add lubricant (SAE 30 oil) as required
▲
Replace lubricant after 5 years
SERVICE BRAKES
♦
Clean and adjust per Technician’s Repair and Service Manual
✓
Check brake shoe linings, wear limit .06" (1.5 mm)
ENGINE OIL
▲
Replace, DO NOT OVERFILL, with SAE 10W-30 or 10W-40, SF, SG, CC oil
FUEL FILTER
✓
Check for dirt buildup
OIL FILTER
♦
Clean in solvent (at oil change), replace ‘O’ ring if required
SPARK PLUGS
♦
Gap .028 - .030 in. (.71 - .76 mm), replace if required
MUFFLER/EXHAUST
✓
Check mounting hardware; check for leaks at head and muffler gaskets
VALVES
✓
Check cold at cam (intake/exhaust), adjust as required
TIMING BELT
✓
Check tension, and for signs of wear/damage, replace if worn or damaged
Fig. 43 Periodic Service Schedule