Textron Greenlee 1818 Скачать руководство пользователя страница 3

Страница: 3 / 40

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

1818 Mechanical Bender

IMPORTANT SAFETY INFORMATION

SAFETY

ALERT

SYMBOL

This symbol is used to call your attention to hazards

or unsafe practices which could result in an injury or

property damage. The signal word, defined below,

indicates the severity of the hazard. The message

after the signal word provides information for

preventing or avoiding the hazard.

Immediate hazards which, if not avoided, WILL result

in severe injury or death.

Hazards which, if not avoided, COULD result in

severe injury or death.

Hazards or unsafe practices which, if not avoided,

MAY result in injury or property damage.

Read and understand all of the

instructions and safety information

in this manual before operating or

servicing this tool.
Failure to observe this warning could

result in severe injury or death.

Do not leave the ratchet handle in the

UP position when the bender is not in

use. A handle left in the UP position

could fall unexpectedly.

Pinch points:
Keep hands away from moving parts

and conduit when bending. Failure to

observe this warning could result in

severe injury.

Wear eye protection when using this

bender. Failure to wear eye protection

could result in serious eye injury from

flying debris.

• Keep the conduit under control when unloading it

from the bender. Conduit may fall and strike the

operator or nearby personnel.

• Maintain a firm grip on the handle when bend-

ing. Springback of the conduit may not allow the

ratchet to fully engage, causing the handle to spring

upward suddenly.

• Remove the handle and conduit before moving the

bender. Maintain a firm grip with both hands on the

frame T-handle to prevent the bender from tipping

over.

• Inspect the bender before each use. Replace any

worn, damaged, or missing items with Green-

lee replacement parts. A damaged or improperly

assembled tool can break and strike nearby per-

sonnel.

• Use proper lifting practices when lifting the bender.

The bender weighs over 75 lb (34 kg), and requires

more than one person to lift.

Failure to observe these precautions may result

in injury.

Use this product for the manufacturer’s intended

purpose only. Use other than that which is described

in this manual may result in injury or property

damage.

Содержание Greenlee 1818









































Результаты поиска

Содержание Greenlee 1818

Отзывы:

Похожие инструкции для Greenlee 1818

Бренды по названию

Популярные бренды

Textron Greenlee 1818, Инструкция по эксплуатации

Результаты поиска

Содержание Greenlee 1818

Отзывы:

Похожие инструкции для Greenlee 1818

Бренды по названию

Популярные бренды