manualshive.com logo in svg

Textron 642211, Установка, Запчасти и Обслуживание

Поделиться
Скачать
Textron 642211 Скачать руководство пользователя страница 3

 2180

Estate
Series

1

IMPORTANT MESSAGE

Thank you for purchasing this Bunton product.  You have purchased a world class mowing product, one of the best
designed and built anywhere.

This machine comes with an Operation and Safety Manual and a separate Setup, Parts and Maintenance Manual.
The useful life and good service you receive from this machine depends to a large extent on how well you read and
understand these manuals. Treat your machine properly, lubricate and adjust it as instructed, and it will give you
many years of reliable service.

Your safe use of this Bunton product is one of our prime design objectives.  Many safety features are built in, but
we also rely on your good sense and care to achieve accident-free operation.  For best protection, study the manuals
thoroughly. Learn the proper operation of all controls. Observe all safety precautions. Follow all instructions and
warnings completely.  Do not remove or defeat any safety features.  Make sure those who operate this machine
are as well informed and careful in its use as you are.

See a Bunton dealer for any service or parts needed.  Bunton service ensures that you continue to receive  the best
results possible from Bunton’s products.  You can trust Bunton replacement parts because they are manufactured
with the same high precision and quality as the original parts.

Bunton designs and builds its equipment to serve many years in a safe and productive manner.  For longest life,
use this machine only as directed in the manuals, keep it in good repair and follow safety warnings and instructions.
You'll always be glad you did.

Textron Golf, Turf & Specialty Products

One Bob Cat Lane

Johnson Creek, WI   53038-0469

6-2002-TGTSP

TABLE OF CONTENTS

FIGURES

PAGE

SAFETY ......................................................................................................................................................... 2
ASSEMBLY AND SETUP ........................................................................................................................... 3, 4
MAINTENANCE CHART ................................................................................................................................ 5
MAINTENANCE RECORD ............................................................................................................................. 6
MAINTENANCE ........................................................................................................................................ 7-12
ADJUSTMENTS ...................................................................................................................................... 13-16
BELT REPLACEMENT ........................................................................................................................... 17, 18
SPECIFICATIONS ................................................................................................................................... 19-21
UPPER ENGINE DECK ASSY ........................... FIGURE 1 .................................................................. 22, 23
LOWER ENGINE DECK ASSY/CLUTCH ........... FIGURE 2 .................................................................. 24, 25
CRADLE ASSEMBLY ......................................... FIGURE 3 .................................................................. 26, 27
DECALS ............................................................. FIGURE 4 .................................................................. 28, 29
BELTS ................................................................ FIGURE 5 .................................................................. 30, 31
BRAKES/REAR WHEEL .................................... FIGURE 6 .................................................................. 32, 33
HYDRAULICS .................................................... FIGURE 7 .................................................................. 34, 35
HYDROGEAR PUMP ......................................... FIGURE 8 .................................................................. 36, 37
DECALS-CUTTERDECKS ................................. FIGURE 9 .................................................................. 38, 39
WIRING HARNESS ............................................ FIGURE 10 ................................................................ 40, 41
FUEL TANKS/CONTROL PANEL ....................... FIGURE 11 ................................................................ 42, 43
OIL COOLER/BUMPER ..................................... FIGURE 12 ................................................................ 44, 45
SEAT ASSEMBLY & ROPS ................................ FIGURE 13 ................................................................ 46, 47
STEERING/DECK LIFT ...................................... FIGURE 14 ................................................................ 48, 49
CRADLE & CASTER ASSEMBLY ...................... FIGURE 15 ................................................................ 50, 51
52" SIDE DISCHARGE ....................................... FIGURE 16 ................................................................ 52, 53

Содержание 642211

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды