Texmo Industries TARO TSM Series, Инструкция и руководство по эксплуатации

Страница: 30 / 33

15. Storage & handling
The Openwell Submersibles are supplied from the factory in proper packing in which they
should remain until they are to be installed
The product should be stored in a closed, dry and well ventilated room
Do not store the products in direct sunlight
Handle the pumps with care and do not expose the product to unnecessary impact and shocks
During unpacking and prior to installation, care must be taken when handling the pump to ensure
that the product is not subjected to shock loads
If the product has been stored for a very long period, check the condition of the rubber gaskets,
free rotation of the shaft and level of water inside the motor
Caution
If the motors are stored, the shaft must be turned by hand at least once a month
Caution
If the motor has been stored for more than one year before installation, dismantle the
motor and check the rotating parts and rubber components before use
Caution
After a long period of storage, the pump should be inspected before it is put in
operation. Ensure the impeller can rotate freely when turned by hand
Caution
Oil Seals, in back to back configuration, are provided to prevent water from inside the
motor from escaping. Do not attempt to run the pump dry. If used to lift water from
bore wells, ensure the pump is primed and then only run it
OMOW001A 30 2020.01