Texmo Industries TARO TSM Series, Инструкция и руководство по эксплуатации

Страница: 20 / 33

Electrical Installation
Earthing
Warning
All electrical work must be performed by an authorised electrician in compliance with
local electrical equipment standards and internal wiring codes. Improper wiring can
lead to current leakage, electrical shock, or fire
Warning
Be sure to install the ground wire securely. Failure to observe this precaution could
damage the pump and cause current leakage, which may lead to electrical shock
Caution
Do not connect the ground wire to a gas pipe, water pipe, lightning rod, or telephone
ground wire. Improper grounding could cause electrical shock
Connecting the power supply
Caution
Observe relevant electricity board regulations while powering up the pump set
Warning
Before inserting the power plug or connecting the wires to the terminal board, make
sure the power supply is properly disconnected. Failure to do so may lead to electrical
shock, short, or injury caused by the unintended starting of the pump.
Caution
Do not use damaged cables, power plugs, or loose power outlets. Failure to observe
this precaution could lead to electrical shock, short circuit or fire.
OMOW001A 20 2020.01