Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
Page 4
PM-35U Manual (P1)
Ordering Information
Standard Options for this Model Number
Part Number Description
4
BASIC MODEL NUMBER
PM-35U
. . . . . 3 .5 digit Red LED, Low Cost, 2VDC, 5VDC pwr
Note:
For operation, the PM-35U requires a CN-L10 Dual Row 10
Pin PCB edge connector 0 .156” center or equivalent (see acces-
sories) .
Special Options and Accessories
Part Number Description
4
SPECIAL OPTIONS (Specify Inputs & Req. Reading)
ZS
. . . . . . . . . .
Custom display scaling within standard ranges
ZR-1200V
. . . .
1200 VDC Range Change.
ZR-200V
. . . .
200 VDC Range Change.
ZR-20V
. . . . . .
20 VDC Range Change.
ZRS-200MV
. .
200 mVDC range change.
ZRS-PMRP
. . .
Non-standard range and scale.
4
ACCESSORIES
CN-L10 . . . . . .Dual Row 10 Pin Connector, Solder Type
PM Case Dimensions and Panel Cutouts
Case Dimensions
TOP VIEW
FRONT VIEW
PANEL CUTOUT
SIDE VIEW
16.82mm
0.662in
29.60mm
1.165in
14.50mm
0.571in
64.77mm
2.550 in
24.64mm
0.970in
69.90mm
2.752in
option metal
screw mounting clip
102.36mm
4.030in
84.50mm
3.330in
Edge connector
When extra panel mounting
tightness is required, optional
Screw Mounting Clips can be
purchased seperately and attach
to the sliding mounting side clips
8.50mm
0.335in
2.50mm
0.098in
Copyright © 2020 Texmate Inc. All Right Reserved.
WARRANTY
Texmate warrants that its products are free from defects in material and workmanship under
normal use and service for a period of one year from date of shipment. Texmate’s obligations
under this warranty are limited to replacement or repair, at its option, at its factory, of any of
the products which shall, within the applicable period after shipment, be returned to Texmate’s
facility, transportation charges pre-paid, and which are, after examination, disclosed to the sat
-
isfaction of Texmate to be thus defective. The warranty shall not apply to any equipment which
shall have been repaired or altered, except by Texmate, or which shall have been subjected
to misuse, negligence, or accident. In no case shall Texmate’s liability exceed the original pur
-
chase price. The aforementioned provisions do not extend the original warranty period of any
product which has been either repaired or replaced by Texmate.
USER’S RESPONSIBILITY
We are pleased to offer suggestions on the use of our various products either by way of printed
matter or through direct contact with our sales/application engineering staff. However, since
we have no control over the use of our products once they are shipped, NO WARRANTY
WHETHER OF MERCHANTABILITY, FITNESS FOR PURPOSE, OR OTHERWISE is made
beyond the repair, replacement, or refund of purchase price at the sole discretion of Texmate.
Users shall determine the suitability of the product for the intended application before using,
and the users assume all risk and liability whatsoever in connection therewith, regardless
of any of our suggestions or statements as to application or construction. In no event shall
Texmate’s liability, in law or otherwise, be in excess of the purchase price of the product.
Texmate cannot assume responsibility for any circuitry described. No circuit patent or software
licenses are implied. Texmate reserves the right to change circuitry, operating software, speci
-
fications, and prices without notice at any time.
PM-35U Technical Manual Copyright © 2020 Texmate Inc. All rights
reserved. Published by: Texmate Inc. USA. Information in this Technical
Manual is subject to change without notice due to correction or enhance-
ment. The information described in this manual is proprietary to Texmate,
Inc. and may not be copied, reproduced or transmitted, in whole or in part,
in connection with the design, manufacture, or sale of apparatus, device or
private label product without the express written consent of Texmate, Inc.
1934 Kellogg Ave., Carlsbad, CA 92008
Tel: 1-760-598-9899 • USA 1-800-839-6283 • 1-800-TEXMATE
Email: [email protected] • Web: www.texmate.com
