User Manual for the FLUXMEDICARE® V2 System
-
IFU-FLUXMEDV2 - V.1.0 - 07/2020
Page 49 / 84
•
The treatment can be stopped for a short while by pressing the
START/PAUSE button. A beeps sounds when the button is pressed and the
blue indicator light goes off.
•
The screen displays “PAUSE” with a time limit
of 15 min. The remaining
treatment time is shown underneath.
•
To continue the treatment, press the “START/PAUSE” button again.
•
If the treatment is not restarted before the end of the pause time (15
min), it is automatically cancelled. The screen shows the end of treatment
and a sound signal is heard until the appliance is turned off.
If the patient has to move away from the source (pause), the intermediate unit and textile (combined) group
must be place on a stable support.
4.4.6.
Stopping before the end of treatment
•
When the laser is emitting the screen displays the remaining treatment time and the blue indicator light is
on.
•
The treatment can be stopped by pressing the “STOP” button. A beeps
sounds when the button is pressed.
•
The light emission stops and the next screen is displayed.
•
If you want to continue the treatment, press the
“START/PAUSE” button.
•
If you want to stop the treatment, press the “STOP” button again.
•
The screen shows the end of treatment.
A sound signal is heard until the source is turned off by the user with the
ON (I)/OFF (O) button located at the back of the light source.