Texecom PREMIER 168 Скачать руководство пользователя страница 8

Страница: 8 / 64

Overview

Premier Series

Master User Guide

INS177

The Quick Arm Keys

The ‘Quick Arm’ keys allow the system to be armed without having to enter a User code first.

The ‘Quick Arm’ keys will only work if the keypad has been programmed to allow
arming in this way.

To FULL arm the system, press

(

To PART arm the system,

press

followed by

Keypad Lock

The keys on the keypad can be locked to prevent unwanted access to the system.

The Emergency keys will NOT operate with the keys locked.

To Lock the keys, press

and

together.

To Unlock the keys, press

and

together again.

Reset and Service Messages

When the system requires a reset/service the display will show one of three messages.

These messages can also be accessed at any time from the normal display.

These messages may have been programmed with the telephone numbers of the
installer or the Alarm Receiving Centre.

When alarm information is being displayed, pressing the SCROLL key will slow
down the display and also allow manual scrolling through the events.

To display the reset/service messages, proceed as follows:

Press

followed by

to view the Service message

!"##$%#"&'$!()

$$*(&$+,&-./,

Press

followed by

to view the Reset message

!"##$012.1,,&$3(

$$4,5,3$+653,'

Press

followed by

to view the Anti-code message

!"##$%4!$3(

4,5,3$+653,'

Press

)

to exit from the messages

The display will return to normal.

Содержание PREMIER 168

































































Результаты поиска

Содержание PREMIER 168

Отзывы:

Бренды по названию

Популярные бренды

Texecom PREMIER 168, Руководство пользователя

Результаты поиска

Содержание PREMIER 168

Отзывы:

Бренды по названию

Популярные бренды